ALIUSORB-CL104 dechlorinating agent In the petrochemical production process, chlorine in the raw gas can cause poisoning of various catalysts and adsorbents, making the adsorbent and catalytic performance ineffective. The presence of chlorine will also seriously corrode devices and equipment, affecting the normal operation of production. Therefore, chlorine must be removed. Solid dechlorinating agents are usually used to remove chlorides in the raw gas. ALIUSORB-CL104 dechlorinating agent has the characteristics of wide operating temperature range, uniform high and low temperature activity, good water resistance, and active components and chlorine after reaction are not easy to migrate. It can be used for dehydrochlorination of synthesis gas and protection of catalysts and adsorbents. It can also be widely used for dechlorination of raw gases such as naphtha, H2, N2, NH3, CO, CO2, etc. There is usually a large amount of HCl in liquid naphtha reforming oil, which will affect the operation of subsequent equipment. ALIUSORB-CL104 can continue to work in any temperature environment, adsorb HCl, and can continuously adsorb HCl.
Performance Metrics:
Appearance: white spheres
Specifications： Φ3-5mm
AL2O3 Adjuvant: ≥93%
Strength: ≥120N/
Specific surface area: ≥130m2/g
Stack density: 0.75-0.80g/cm3
Penetrating chlorine capacity: 50° ≥12%
Penetrating chlorine capacity: 350° ≥22%
Conditions of Use
Operating temperature 5-400°C
Operating pressure: normal pressure - 0.8Mpa
Airspeed 1000-3000h-1
Bed height-to-diameter ratio >3
Chlorine rejection rate ≥99.9%
Packaging and precautions
25kg/bag, 25kg/drum packaging (lined with plastic bags).
This product must be moisture-proof, and when transporting, loading and unloading, it is forbidden to fall and be stored in a closed manner.
